PA6 GF40 FR 難燃性ナイロン6ペレット

PA6 GF40 FR is a flame-retardant nylon 6 compound reinforced with 40% glass fiber, supplied as injection-molding pellets. The reference grade on this page is PA6 WHRG40A.

アプリケーション Connector housings, switch housings, terminal blocks and reinforced appliance parts.

リファレンスグレード: PA6 WHRG40A; use the exact suffix when comparing data or requesting material.

Flame requirement: The supplier sheet lists V-0; confirm specimen thickness and the required test record.

For a quote: Send the drawing or application, wall thickness, color, quantity and destination.

カテゴリー: ,

PA6 GF40 FR Material Overview

PA6 GF40 FR is a flame-retardant nylon 6 compound reinforced with 40% glass fiber, supplied as injection-molding pellets. The reference grade on this page is PA6 WHRG40A.

項目 詳細
ポリマー PA6(ナイロン6)
補強 40% ガラス繊維
リファレンスグレード PA6 WHRG40A
フォーム ペレット
処理 Injection molding; confirm current grade instructions

参考資料の物性値

リファレンスグレード: PA6 WHRG40A. Values apply to the stated supplier reference, not every formulation in the material family.

プロパティ 代表値 単位 試験方法
引張強度 150 MPa ISO 527-2
破断時の引張ひずみ 8 % ISO 527-2
曲げ弾性率 9000 MPa ISO 178
HDT、方法B 186 °C ISO 75-2/B
密度 1.60 g/cm³ ISO 1183
成形収縮 0.4 % ISO 2577

These typical values belong specifically to PA6 WHRG40A. Specimen conditioning and flame-test thickness are not stated in the supplied sheet. Confirm the current revision and the required test conditions before approval; HDT is not a continuous service-temperature rating.

Download PA6 WHRG40A supplier reference datasheet (PDF)

PA6 GF40 FR Applications

PA6 GF40 FR nine illustrative application examples
使用例:ご使用の部品に適したグレードをご確認ください。画像をタップすると拡大表示されます。

Connector housings and terminal blocks.

Consider this compound for rigid housings around terminals and fasteners. Check pin retention, thin sections, weld lines and the electrical requirements for the selected grade.

Switch, relay and control housings.

Ribs, snap features and screw bosses need stiffness without brittle failure during assembly. Agree the flame standard and specimen thickness, then validate production-tool samples.

Motor, appliance and fan structures.

Review heat exposure, vibration, inserts and critical fits. The reinforcement can influence shrinkage and direction-dependent properties, so check the molded component rather than relying on test-bar data alone.

加工および部品検査

Follow the WHRG40A drying and molding instructions. Review gates, weld lines, glass-fiber orientation, tooling wear and moisture conditioning. Confirm the required flame performance on the exact production formulation and thickness.

完成した部品については、引き続き 射出成形. To compare material families, review the エンジニアリングプラスチック製品群.

資材供給および製造支援

ナイロン・プラスチック エンジニアリングプラスチックの供給と受注生産を結びつけます。 WANHANは、当社の提携コンパウンディング工場です; 以下の写真は、その原料供給設備、押出成形工程、および実験室の様子を示しています。

ナイロン・プラスチックの協力工場であるWANHANの材料供給装置
材料の供給
WANHANの提携工場における押出成形されたプラスチックストランド
押出成形プロセス
WANHAN提携工場の実験作業エリア
研究所

グレードおよび配合の選定

現在のグレード、用途、および使用条件をお知らせください。当社で材料の検討を行い、ご提案する配合に適合するデータシートを特定いたします。

ご注文に応じた高品質な文書

購買チームが必要とするTDS、バッチ記録、検査要件、またはコンプライアンス関連ファイルを指定してください。見積対象の材料については、関連文書および受入基準が合意されています。

樹脂ペレットにとどまらないサポート

完成品については、材料選定を部品設計、金型、成形審査と連携させて進めてください。まずは図面、予想生産数量、および重要寸法から検討を開始してください。

提携工場のマネジメントシステム認証

添付のISO 9001、ISO 14001、およびISO 45001の認証書には、以下の内容が記載されています。 広東万漢 認定対象機関として。その対象範囲は以下の通りです。 改質プラスチックペレットおよびそれに関連する管理業務; すべての材料グレードや、すべての完成品製造サービスを認証しているわけではありません。

製造能力および品質関連文書を見直す. 文書の承認にあたっては、法人名、証明書の適用範囲、および記載された等級が一致していることを確認してください。

よくある質問

What is PA6 GF40 FR?

It is nylon 6 reinforced with 40% glass fiber and formulated for flame-retardant applications. This page uses PA6 WHRG40A as its specific supplier reference.

Which applications are candidates for this material?

Connector bodies, terminal blocks, switch and relay housings, control enclosures and reinforced appliance structures are candidates. Each component needs a review of load, heat, electrical spacing and assembly requirements.

Does the V-0 listing certify my finished component?

No. The supplier sheet lists V-0 without specifying the test thickness. Request the applicable report and verify the exact formulation, color and thickness required for the part; the finished assembly may require separate qualification.

Can I use WHRG40 data for WHRG40A?

Do not assume that a similar code means identical material data. Use the WHRG40A sheet linked here and have the exact grade suffix confirmed on the quotation and supplied material.

Does the 186°C HDT define continuous operating temperature?

No. HDT under ISO 75-2/B is a laboratory deflection result. Long-term heat exposure, load, moisture and part geometry need separate assessment.

What should I include in an inquiry?

Send the application or drawing, minimum wall thickness, flame and electrical standards, operating conditions, color, quantity and destination. Identify any current grade that the new material must replace.

資料の請求とお見積りの依頼

Send your application or drawing, current grade, service conditions, color, quantity and destination. Include required test methods, documents and acceptance criteria so the offered material can be evaluated against the project.

Request PA6 WHRG40A TDS and Quote

トップに戻る

連絡先

下記のフォームにご記入ください。.

連絡先