PA6 GF35 Material Overview
PA6 GF35 is nylon 6 reinforced with 35% glass fiber, supplied as pellets for injection molding. It is used for reinforced housings, brackets and structural parts where stiffness and dimensional control matter.
| 項目 | 詳細 |
|---|---|
| ポリマー | PA6(ナイロン6) |
| 補強 | 35% ガラス繊維 |
| フォーム | ペレット |
| リファレンスグレード | PA6 WHG35A |
| 処理 | 射出成形 |
Typical Material Properties
リファレンスグレード: PA6 WHG35A. The following values are from the supplier datasheet linked below; they are typical material values, not finished-part specifications.
| プロパティ | 代表値 | 単位 | 試験方法 |
|---|---|---|---|
| 引張強度 | 175 | MPa | ISO 527-2 |
| 破断時の引張ひずみ | 9 | % | ISO 527-2 |
| 曲げ弾性率 | 7000 | MPa | ISO 178 |
| HDT、方法B | 175 | °C | ISO 75-2/B |
| 密度 | 1.40 | g/cm³ | ISO 1183 |
| 成形収縮 | 0.5 | % | ISO 2577 |
HDT is reported under method B. The source does not state specimen conditioning. Confirm the current grade and test conditions before design approval.
PA6 GF35 Applications

Power-tool gearbox housings and load-bearing frames.
Reinforced shells and frames support gears, bearings and fasteners. Check screw bosses, weld lines and vibration loads in the molded part.
Automotive brackets and industrial housings.
Mounting brackets, covers and machinery housings need repeatable fit around inserts, ribs and attachment points. Review the load direction and moisture exposure when setting tolerances.
Fan impellers, pump components and appliance frames.
These parts combine rotating or assembly loads with temperature exposure. Confirm fluid compatibility and validate the molded component for its duty cycle.
加工および部品検査
選択したグレードの乾燥および成形指示に従ってください。試作の際には、ゲート位置、繊維配向、ウェルドライン、収縮率、および重要寸法を確認してください。対象の金型とプロセスで製造した部品について、性能を確認してください。
完成した部品については、引き続き 射出成形. 素材の比較を行うには、 エンジニアリングプラスチック製品群.
資材供給および製造支援
ナイロン・プラスチック エンジニアリングプラスチックの供給と受注生産を結びつけます。 WANHANは、当社の提携コンパウンディング工場です; 以下の写真は、その原料供給設備、押出成形工程、および実験室の様子を示しています。



グレードおよび配合の選定
現在のグレード、用途、および使用条件をお知らせください。当社で材料の検討を行い、ご提案する配合に適合するデータシートを特定いたします。
ご注文に応じた高品質な文書
購買チームが必要とするTDS、バッチ記録、検査要件、またはコンプライアンス関連ファイルを指定してください。見積対象の材料については、関連文書および受入基準が合意されています。
樹脂ペレットにとどまらないサポート
完成品については、材料選定を部品設計、金型、成形審査と連携させて進めてください。まずは図面、予想生産数量、および重要寸法から検討を開始してください。
提携工場のマネジメントシステム認証
添付のISO 9001、ISO 14001、およびISO 45001の認証書には、以下の内容が記載されています。 広東万漢 認定対象機関として。その対象範囲は以下の通りです。 改質プラスチックペレットおよびそれに関連する管理業務; すべての材料グレードや、すべての完成品製造サービスを認証しているわけではありません。
製造能力および品質関連文書を見直す. 文書の承認にあたっては、法人名、証明書の適用範囲、および記載された等級が一致していることを確認してください。
PA6 GF35 — Frequently Asked Questions
What is PA6 GF35?
PA6 GF35 is nylon 6 reinforced with 35% glass fiber, supplied as pellets for injection molding. The PA6 WHG35A datasheet on this page is the supplier reference for the listed typical properties.
Which parts can use PA6 GF35?
Typical candidates include power-tool gearbox housings, automotive mounting brackets, machinery covers, fan impellers and appliance frames. Ribs, screw bosses, load direction and weld lines need checking in the molded part.
Can I use these datasheet values as finished-part specifications?
No. They are typical values for PA6 WHG35A test specimens. The source does not state specimen conditioning; agree the conditioning, test method and acceptance criteria for your part before approval.
What should be checked before molding PA6 GF35?
Follow the selected grade’s drying instructions. Review moisture exposure, gate position, fiber orientation and shrinkage before setting critical dimensions. Confirm fit and performance with the intended tool and process.
Is this PA6 GF35 grade flame retardant?
A glass-fiber percentage does not establish a flame rating. If your part requires a flame classification, send the standard and specimen thickness so the matching formulation and supporting record can be checked.
What do you need to quote PA6 GF35?
Send the application, current grade or material target, color, quantity, service conditions and delivery destination. For molded parts, add the drawing, critical dimensions and expected production quantity.
資料の請求とお見積りの依頼
用途、入手可能な場合は現物資料、使用温度、負荷や接触する流体、色、予想数量、および納品先をお知らせください。完成品が必要な場合は、図面も添付してください。









